The right edge: NEW 1350mm width joins the 660mm and the 1100mm

  

How it works

DM machines with ZC configuration, combine deburring and strong edge rounding in one single machine, processing small and large parts cut mainly on laser and plasma.

The large diameter contact roller deburrs efficiently small and medium size burrs while the 2 counter rotating abrasive cross belts leave a soft edge both on the internal and external contours of the parts.

Now, DM ZC machines are available in 3 working widths (660, 1100 and 1350mm) being able to better suit each company production range. Since the 2 stations have an independent construction, these machines enable the work with 1 station only as well. Making a soft edge on burr free laser or punched cut parts or supplying a linear finish on metal sheets is possible with any of these versions.

Small parts down to 50x50mm deburring and edge rounding is one of the big strengths of this machine. More, this line of equipment can be fitted with parts return systems and support roller tables increasing productivity both on small and large parts processing (available from NS Máquinas). The integration with these devices is made easier due to the fixed conveyor belt working height design.

   DM660 ZC                      DM1100 ZC                 DM1350 ZC

For more information please visit our website: www.nsmaquinas.pt or contact us at marketing@nsmaquinas.com.

Oxide Removal Cross Belt Machibe

DM1100 CT Oxide Removal Cross Belt Machine

 DM1100 CT is a single side cross belt machine which removes oxide layer from oxygen laser cut steel parts both on the inside and outside areas.

Also, by replacing the cross belt set for edge rounding type this machine can remove sharp edges of stainless steel, steel and aluminium parts cut by laser, punching or shearing. This deburring machine can work parts longer than 180mm and as a table with 1100mm width. For smaller parts edge rounding please contact us for our DM1100 C.

Principle of work: 2 v-belts with abrasive blocks or oxide removal wire brushes running in opposite directions guarantee that all sides on the top surface and upper half thickness will be cleaned from oxide or edge rounded  in one single pass.

Both sides, single side and before oxide removal steel samples

Oxide Removal: removing oxide layer from thickness of steel parts up to 8mm in one pass or up to 16mm in 2 passes. Cleans simultaneously internal holes.


For more information on our oxide removal machines email us at marketing@nsmaquinas.com